Pros and Cons of using Material handling for your industry

There is an old saying, ‘Hard wheels for soft floors and soft wheels for hard floors!’ For example, suppose you have a piece of equipment for running in an office environment with a carpet floor. The best Material Handling Equipments for the job would be those that have rigid wheels, such as nylon wheels or rigid plastic wheels. In contrast, in a warehouse environment with a hard concrete floor, a castor that reduces the amount of vibration when moving heavy loads will be a castor with a soft polyurethane wheel or a rubber wheel. In outdoor conditions, such as in garden centers, these trolleys carry our plant purchase material handling housing on aerated or air-filled wheels for easy mobility.

When it comes to lifting or lifting weights, material handlings can draw, there is a mathematical equation! Don’t worry, just ‘the load capacity of the aster lid should be one third of the weight of the trolley and the maximum load it can carry’. If this surprises you, it literally means that if you are going to make a feature ‘clearer’, then specify the load capacity for the material handlings you have selected. For example, if you have four castors on a trolley, confirm the total load on the trolley; Can only take three material handlings. This allows for uneven floors, as only three material handlings can touch the floor at any one time and take full load!

As well as the floor surface and the load capacity of the material handlings, the important things are the style, design and fitting of the material handling housing. The material handlings come in a variety of designs ranging from small office chair material handlings to material handlings that can carry more than 6 tons. Rotating material handlings rotate to improve mobility and can be equipped with brakes to lock wheel and swivel movement. Material handling equipment at equip2go.com.au is available with a variety of fittings. The choice of fitting is largely a question of the frame in which the castor should be fitted. The two most popular options are top plate fittings or bolt hole fitting material handlings.

One of the final decisions is the size and type of wheel in the material handlings. In most cases, the larger the wheel, the higher the load bearing and the easier it is to move. There are a wide variety of wheels and the options you choose will vary depending on your application.

In this article

Join the Conversation