How to craft an ideal engineer’s workbench?

“Work is worship, and the work-place is no less than a temple.”
Having a clean, organized, and well-equipped workspace is more of a necessity. Also, a work table is a chief piece of furniture that happens to be found in every working area.

Using proportional and minimal elements is always advisable when designing almost anything. The same rule applies to the modeling of an engineer’s work table. Another point of considerable importance is the placement of these elements.

Warm colors bring about stimulation and balance, hence are always preferable over cool colored segments. On the other hand, Modularity gives a clean appearance after all structuring the entity, and flexibility are two essentials of design.

All these things work collectively to bring out a fully-functional aesthetic product where the focus has not deviated.

What is the need for a well-designed workstation?

Having a fine-workspace is not optional anymore! It has become a requisite which cannot be easily ignored. A good project-station is the one which caters to all your operating requirements and is compact and efficient.

An engineering workbench should not be as burly as a garage-workbench. For a smoother workflow, your electronic workbench should be well-sized and compartmentalized. It not only keeps stuff systematized but also adds to enhanced and productive working results.

Since workbenches are usually built using non-conductive materials like wood, an adjustable laboratory bench is also a substantial choice since it facilitates people of all heights and sizes.

What is all paraphernalia suited for your workbench?

  1. All-in-one electronic toolkit – The most significant commodity.
  2. Project-binder – To keep up with the deadlines and features of the project.
  3. Seating- Since you cannot stand all the time, this is an important “go-with.” Your chair should be meticulously comforting: neither too much nor too rigid.
  4. Work mat- To avoid ruining the workbench and to expand its lifetime.
  5. Work lamp- For better vision and clarity of details.

THE ACTUAL PROCESS!

A perfect workbench should be durable, inexpensive, and movable.
Step 1: Find your needs, purpose, and requirements – Why and where will you use your bench?
A 5 to 6 feet wide and at least 2 feet deep workbench is highly recommended since it promotes spreading out projects.

Step 2: Make a list of the tools involved. Here’s a list of basic materials needed –
Drill, Level, Calipers, Calculator, Saws, Chisel, Wheels, Heat Gun, Flux, Oil, Glue, Wood, Nuts, and Knife.

Step 3: Cut and combine – Saw, Resaw and glue
Tip- To reduce the risk of kickback, which is caused by internal stresses of wood, prefer constructing a thicker top.

Step 4: Finish the product by Squaring the sides

Step 5: Drill and assemble
The market offers several variables to choose from- BGA rework station (automatic), and its updated versions are few of them.

THINGS TO REMEMBER-

  1. Some sort of power strip with multiple outlets is a critical must-have.
  2. Your safety and hygiene always remains the primary concern and therefore, the following things should be necessarily stocked-
    Safety glasses and gloves – to block the transmission of chemicals
    Fire Extinguisher
    Cleaning Supplies- Wipes and cleaning cloths
    Eye-wash solution
In this article

Join the Conversation