Four Tips To Maintain a High Performing Boat Engine

The technology advances in manufacturing, anti-corrosion coating, innovative designs, new metal alloy, and lower emissions have made boat engines operate better. Keep your boat engine running at its best by having proper setup and maintenance. Here are a few pointers to help you keep your boat engine in peak condition.

1. Anode Replacement

Having a Yamaha outboard Anode replacement is the safest way to protect the engine from corrosion. Only the Anode will get affected if you use or replace an anode, which will protect all metals in the outboard engine from rust. Consider removing the Anode if it becomes damaged as part of your boat’s maintenance. If the Anode becomes corroded and is not replaced, other parts of the engine get exposed to corrosion.

 

If you’re using an internal anode, you’ll need to open and inspect your outboard engine regularly as opposed to the Anode bracket, where you can trim the outboard engine until you find the Anode part and repair it. When making adjustments to your Anode, it’s necessary to reinstall the mass cable to get the best results.

 

When inspecting the Anode, don’t expect it to look brand new; however, if you notice more than 50% physical changes, it’s time to replace it. Anode maintenance done correctly will give your engine years of peak performance.

2. Get a Fuel Stabilizer and Boat Treatment

Petroleum fuel deteriorates over time, exposing the engine to water, light, oxygen, and heat. When your engine experiences fuel instability, it alerts you that a chemical chain reaction occurs within. Stable molecules become unstable as a result of this reaction, resulting in a black mixture. When the engine gets exposed to so much water, the fuel gets exposed, making separation difficult.

 

It is important to get a fuel stabilizer because the marine environment contains a lot of water, which causes instability in both diesel and ethanol fuels. A fuel stabilizer is a treatment that prevents the chemical reaction that causes instability from occurring. It is important to treat the fuel when it is still in good condition since the fuel stabilizer cannot treat the fuel after it gets damaged.

 

Even if you keep your fuel clean and in good condition, ethanol can still cause problems. It is important to use an addiction when using ethanol gas as a way of treating the fuel.

 

3. Flush the Outboard Motor after Every Use

It is critical to flush your marine engine with fresh water regularly to extend the life of your boat. A freshwater flush is particularly necessary on a boat that operates in saltwater. Flushing the engine with freshwater would aid in the removal of salt residue and scale that has accumulated in the cooling passages, obstructing the flow of cooling water to the engine.

 

It’s important to have a freshwater flush if you are using your boat in dirty freshwater or brackish water. You will need a boat on a trailer or a water dock or mooring to flush your boat. Use the owner’s manual as a reference during the flushing process. The flushing procedure varies from boat to boat. Flushing the engine properly can help to avoid corrosion in various parts of the engine.

4. Servicing the Engine

Do not wait until your boat gets damaged to inspect it. It is important to service the boat at least once a year. You should also pay attention to new, different, and vibration noises because they will help you figure out whether a boat is having problems. Regularly inspecting and diagnosing minor issues will extend the life of your engine.

 

The oil engine also needs to get checked 3-4 times annually. Examine the oil’s levels as well as its color. If the oil becomes milky or rises above the dipstick, you should seek professional help to avoid further damage. Boat oil, like car oil, oxidizes and turns black. If you find a black color shift in the oil, you can change it right away. Keep the oil clean by having the oil filters changed.

 

You can sustain a high-performing engine by how you treat it. To prevent corrosion problems, keep an eye on the Anode. The easiest way to extend the life of your engine is to get it serviced. When operating on salty water, always flush your engine with fresh water.

 

In this article

Join the Conversation