Zippers are not just functional basic requirements because they have also become important aesthetic decorations for different types of products.
However, did you know that improper ironing can have some negative effects on your zippers and their specific parts?
The following are just a few of the things that can happen when you iron zippers the wrong way:
- Ironing your plastic zippers directly can lead to overheating that will result in the distortion of the zipper pulls. This can even cause the characters imprinted on the zipper to be removed.
- Some level of shrinkage can occur in your zipper while ironing. Zippers may perform improperly once exposed to high temperatures during ironing. The zipper teeth may soften and get deformed in the end.
- The oxidation layer that is found in a metal zipper may stain fabrics of light colour if the cloth is not arranged correctly between the zipper and the fabric before you start ironing it.
- The painting layer of a zipper may also peel off when this is directly exposed to the iron while ironing.
- The protective layer of an electroplated zipper slider may also get damaged once this comes into direct contact with the high temperature of an iron.
- The protective layer that can be found on the surface of zipper teeth may melt once exposed to high temperature or extreme heat that can then stain the fabric.
- The strip in a reflective coil zipper may get wrinkled once directly exposed to a hot iron and also once it gets subjected to a high temperature that is more than 100oC.
- The zipper slider may also end up breaking once ironed using excessive pressure.
- The waterproof membrane of a zipper can break or fall or sometimes even bubble or melt once directly exposed to high temperatures of more than 150oC.
How to Protect Your Zippers When Ironing
It is important that you are careful and attentive enough when ironing in order to protect your zippers and extend their life.
Aside from that, it is also essential that you use the right temperatures for zippers when ironing. But, the temperature might vary from one zipper to another which depends on the specific type of material. For example, the heat resistance of a plastic zipper is up 130oC while temperatures ranging from 150oC to 160oC are more suitable for coil zippers and concealed zippers respectively.
It is also important to make sure that you don’t contact with zippers directly every time you iron clothes. See to it that zipper is also zipped and properly placed on a horizontal surface.
You can then place a piece of paper or cloth between the iron and the zipper and iron it for less than 5 seconds every time to prevent the zipper from getting deformed.
The last but definitely not the least, never package zipper right away after ironing. Letting it dry first thoroughly can be very helpful to protect your metal zippers from any discoloration.
Visit https://www.zippershipper.com for your zipper needs.