Most of the workers get hurt on foot in the workplace. There is a vital need for safety for their feet so that they can work comfortably at their workplace.  If you are working in any industry, wearing safety footwear is one of the main parameters for your safety. Unlike the old safety shoes who only have the peculiarity of security, modern safety shoes offer many features like safety, comfort, and stylish design, etc. But how to choose the right footwear which can meet all your requirements and needs. It is quite an important task to choose the right pair of safety footwear. Today we will discuss the complete parameters which should be considered while finding the best safety footwear for you.

Footwear Size

Right Length

Size of safety footwear is a crucial parameter in buying safety shoes. Firstly, you should try every shoe which you are going to purchase and never assume it fits on your feet according to the shoe number. This is because of the size, according to the shoe number, vary from brand to brand. That’s why every time one should try safety footwear before purchasing. Also get Boiler Suits for safety purposes.

Fit Size

Second, it is a misperception that the size of safety shoes should be much large than the size of your foot. This is not right. The size of the shoe should be in between, not too large or not too short. The size of footwear should be that much large that your toes and your foot back are comfortable. If your shoe size is right, you will not feel fatigued.


Suppose you have to wear shoes 8 hours daily and these shoes are not convenient for you can you work as proper as you work while you are suitable? Comfortable shoes will keep your mood pleasant, and a friendly attitude will result in good work also. Moreover, if your feet are relaxed, you will not feel fatigued early, it will keep you active, which in the result is also good for your health. So, it is concluded that comfort is a critical parameter in choosing safety footwear, so you should never bid your satisfaction with anything else. Also check out FR Coverall for safety purposes.


Attributes of Safety Footwear

There are some specific characteristics that safety footwear should meet. While choosing the safety footwear do pay heed on the following features that your safety footwear should carry.

Anti-penetration layer

While working in industry or at any rugged places outside the home, there is a possibility of some sharp object penetration to your shoe, which can harm your foot seriously. So, there should be an anti-penetration layer inside the soul of your footwear to protect you from that kind of insecurities.

Protective toe cap

The protective toe cap is also mandatory in safety footwear. If any load falls on the toe of your foot, this cap protects this vulnerable part of your body.

Waterproof materials

Your shoes should be made up od waterproof material because in the industry it is possible for you to work in wet conditions sometimes.

ESD sole

There should be ESD (electrostatic discharge) bottom so that your footwear can protect you from electrical hazards.

Heat resistant sole

The sole of your safety footwear should also be heat resistant because, in the industry, you have to work in hot conditions several time.

Oil and acid resistant sole

Oil and acids are extensively used in industries and workplaces, but they are hazardous when contact with human skin. The bottom of your safety footwear should be resistive to oil and acids so that it can protect your skin.

Slip-resistant sole

In industry and various workplace, mostly working conditions are very rigid. So, if your shoe has slip resistant sole, it is a plus point for you. One can work efficiently in wet and rigorous conditions without the fear of slipping.


As the attributes of safety footwear are mentioned above, there should be some standards for them to define the value of your protection. There are different standards there for the safety shoes to decide whether they are eligible for the specific task or not. Various rules have a different set of peculiarities. We are elaborating some of the primary standards of safety shoes and their features.

Class    Features

SB    Safety basic, 200 joules Toe Protection, Oil Resistant outer sole.

SBP    As SB plus Mid-Sole for penetration resistance.

S1    As SB plus Anti-Static properties and fully enclosed Energy Absorbing heel area.

S1P    As S1 plus Mid-Sole for penetration resistance.

S2    As S1 plus resistance to Water Penetration and absorption.

S3    As S2 plus Mid-Sole for penetration resistance and cleated outsole

S4    200 joules Toe Protection.  All rubber or polymer construction. Antistatic properties.

S5    As S4 plus Mid-Sole for penetration resistance and cleated outsole.

As the list of standards are unveiled above, you can choose the safety footwear of specific standard according to your need or desire.

In this article

Join the Conversation