6 Simple Things You Didn’t Know You Could DIY

Image Source: Pexels.com

Since the economy is unforgiving, we all should learn how to live a frugal life. It is vital to learn and get better at handling things you used to pay professionals to do. Aside from DIY home improvement, you can take care of your car on your own and save a lot of money.

Keep reading to learn simple car DIY tips you should begin trying.

Air Filter

You can work on your air filter without requiring any tool and do it in less than ten minutes. You need to replace your air filter each year or after every 12,000 miles. With a mechanic, you will give up your car for the whole day, so here is what you should do.

The filter is in a black rectangular box. But if you can’t see it, check your owner’s manual. Open the casing to see how your air filter fits inside. Also, be sure to remember the side that the filter faces. Remove the old filter and install the new one the same way and close the metal clips when done.

Battery Maintenance

For this one, you will need a wire brush, rags, wrenches, and corrosion-removal fluid. You will complete the work in 20 minutes max. Remove your battery terminals and make sure the negative cable comes out first.

Use a Coca-Cola to clean the posts. Most of those solutions are a mixture of baking soda and water. Use a little water to rinse off the cleaning fluid. You will then use rags to dry the posts before replacing the battery terminals.


After every few months, you need to check for any irregularities on your seatbelt system. You need to conduct a thorough inspection if you purchased a used car or experienced a car accident. Check to see if there are any cuts, fraying, or wearing on the seatbelt.

You will also be able to see if there are any loose nuts or missing bolts. If the bolts and nuts are loose or missing, be sure to replace or tighten the loose ones. The auto-return mechanism of your seatbelt system should work as well.

Brake Pads

You must replace the brake pads every 20,000 miles to keep your car in good shape. To be sure about your model, be sure to check the owner’s manual. To work on the brake pads, jack up the car and break the lugs on the tires before touching anything else.

The brake pads will slide out through the tops when you remove the brake calipers, so do that. Once they are out, you will replace the old pads with the new ones. Use the same retaining clips to secure them into position. Compress the brake piston and then tighten the clamp. Finally, re-install the brake caliper.

Windshield Wipers

You don’t need any tools for this, and you can complete the process in 15 minutes maximum. Start by lifting the car blades as if you want to wash the windshield using your hands. Remove your old blades. While doing this, take note of how the blades are connected to the metal arms.

Most blades come with tabs beneath the wiper. Remove the old blade by pushing the tab. From there, install the new blades so that the wiper arms are not bent. You can also scratch the windshield if you do things.

Cleaning Wheel Wells

Many people only focus on the wheels and tire sidewalls. The clean well should be cleaned. , you can do it in 20 minutes using a hose to spray the inside of the wells. Next, scrub the area with a brush to remove the stains.

It is important to use a clean brush that you have not already used on any other part of your car. This area gets little to no attention. The dirt can build up and will be harder to remove, so do it as regularly as possible. Use more professional automotive tools online to make sure the job is done right. 

That is how you need to clean and maintain your car. As you can see, the tips are straightforward and will help you save a lot of money in the long run. There is no need to hire a professional once you’ve mastered the DIY tips. At first, things will seem a little tricky, but you will get used to them with time.

In this article

Join the Conversation