10 Easy Steps To Wash Your Car Like A Professional
There is a lot more to waxing and washing in association with protecting and cleaning the paintwork on your car.
There is something extremely satisfying about having a car that is meticulously clean. Of course, hiring Houston car wash like Soap Hand Car Wash to clean your car is extremely good. This is something that is rarely achieved at automatic car washes that use hard-bristled brushes and the effectiveness is limited. Even when it comes to those DIY cleaning bays, the foaming brushes are known for collecting debris and grime which can end up scratching the paintwork of your car.
A better method would be to wash your car yourself in your driveway at home with a couple of buckets and your hose. This allows for a way to really focus on the dirtiest parts of your car. When you wash your own car, it also means you can wash your vehicle with care, while avoiding damaging or scratching the paint. Here is our list of 10 easy steps you can follow to clean your vehicle like a professional in your own driveway.
- Determine The Overall Condition Of Your Car
This may seem like an obvious step, but it is an important one. Consider how dirty the vehicle actually is before you pull out your cleaning supplies, buckets, towels, and your hose. Is your vehicle covered in a layer of fine dust, or are the rockers caked in mud?
You might not need a host of different products when your car only requires a touch up wash. It is also important to take the car into consideration. For example, if your car is old, it may require a complete cleaning regimen using polishes and waxes to protect your aging paintwork. If you have a newer car, the clear coat might still be robust and in good condition.
- Read The Labels On Your Products
Before you apply any product to your car, make sure you have read the labels. Not all of the auto cleaning products can be used over every area of your car, and there are some that may even cause damage to the finishes, the clear coat or your paint.
In addition, when you take the time to read over the directions, it can help to save your money and time and to ensure you are using the correct product amount for the task you are working on.
- Use The 3 Bucket System
The overall aim of a deep-clean for your car is to remove the debris and contaminants off the surface of your car. You want to avoid washing your car with water that is dirty. This will only spread the dirt around rather than removing it from the vehicle.
This is when you should be using the 3 bucket system. One of your buckets should contain soapy clean water, while the other bucket should contain just water. The bucket with the water will be used to rinse the cleaning mitt before you put it back into the bucket with soap. Your 3rd bucket should only be used for your tires and wheels, as these areas are usually very dirty.
- Wash Your Car
You may be thinking that washing your car should come later on. Yet in fact, washing the vehicle is where you will begin your journey to achieving a professionally cleaned car. This step removes all the loose contaminants like mud, dirt, and dust.
Before you start working on the paintwork with your wash mitt, it is important to first rinse the car off to remove the larger particles of dirt. From here you can add your soapy water, just ensure you are using a soap that is made for cars. Dish cleaners and liquid detergents may strip the wax and cause damage to the paint.
- Preparing The Surface
Once your car is washed it now becomes easier to notice the blemishes that are deep-seated like oxidation marks, scratches, and swirls. If you feel the paint with your hands you will feel contaminants that are bonded into the paint despite the fact that the car has just been washed. In order to remove these types of blemishes, a clay bar is an effective tool for removing stubborn stains and spots along with wax that was applied previously to your car.
The sketches are a bit more difficult to remove, and this is a step that requires using a compound. This is also a process that may require several applications in order to hide the scratches. If your car has deep scratches you may want to consider touch up paint.
- Polish Your Car For Added Gloss
Once you have washed your car and the surface is prepared, you can move onto polishing your vehicle to give it a shiny and glossy appearance. This is an optional step that you can either apply using a dual-action polisher or apply the product by hand.
- Use Wax To Protect The Exterior
Most people are under the impression that wax is used to provide a shine. This is partially true, but the main role of wax is to protect your paint. Wax adds an additional protection layer which stops the paint from fading and protects it from UV rays.
Wax will also protect your car from things that are corrosive such as bird poo. You can choose between polymer or carnauba wax, while the polymer wax is an easier product to apply.
- Maintain Protection And Shine
Once you have washed, cleaned, and finally protected your car, the following step involves maintaining the protection and shine. Keeping a spray-detailer along with a microfiber cloth in your car is really useful to quickly remove overspray, dust, and bird poop when you are on the go.
Regular maintenance, also makes protecting, cleaning, and washing your car a lot easier the next time around. You can also use a cleaner-wax which can save you time when a complete regimen is out of the question.
- Washing The Windows
This is another area where it is important to use the correct product. The window cleaners like Windex contain ingredients like ammonia which can damage the tint on your windows. Rather choose a product designed for windows on cars. There is sadly no easy trick to remove streaks but to use good old elbow grease.
- Washing The Wheels
Now that your car is really clean and your windows are clear and streak-free, the last step involves the wheels. You need to use a product that matches up to your wheel type. If you are unsure about the materials that make up your wheels, choose the mildest wheel cleaner. Try to avoid getting this product onto the tires to avoid the product spraying up onto the paint as soon as you drive the car again.